How to Measure Truck Height: Avoid Height Restriction Headaches

“Oh no, my truck is stuck!” Tuan, a delivery truck driver in Cau Giay District, yelled in frustration amidst the bustling Hang Bai Street. His Hyundai Porter H150, loaded with goods, was wedged under a bridge with a 2.5m height restriction. It turned out that due to not knowing how to measure truck height accurately, Tuan found himself stranded on a major thoroughfare.

Tuan’s story serves as a cautionary tale for drivers about the importance of understanding how to measure truck height. So how do you measure truck height accurately to avoid a similar predicament? Let’s delve into the details with XE TẢI HÀ NỘI in this article!

The Importance of Knowing How to Measure Truck Height

Truck height is a crucial parameter that directly affects the vehicle’s mobility, especially when navigating routes with height restrictions such as overpasses, tunnels, and underpasses.

Knowing how to measure truck height accurately ensures you:

• Avoid Fines: Driving a truck exceeding the permitted height on roads with height restriction signs can result in fines ranging from 800,000 to 1,000,000 VND (according to Decree 100/2019/NĐ-CP).
• Ensure Safety: Navigating height-restricted areas without knowing your truck’s dimensions can lead to accidents, vehicle damage, and cargo loss.
• Choose Suitable Routes: Knowing your truck’s height allows you to proactively select appropriate routes, avoiding those with height restrictions, saving time, effort, and transportation costs.

Guide to Accurate Truck Height Measurement

To measure truck height accurately, consider the following:

1. Prepare Measuring Tools

You can use a tape measure or a measuring stick to measure truck height. Choose a tool with a length suitable for the vehicle’s size.

2. Identify the Measuring Point

The highest point of the truck is usually the top of the cabin or the roof. Accurately identify this highest point to begin measuring.

3. Position the Measuring Tool Perpendicular to the Ground

Place the measuring tool from the highest point of the truck down to the ground vertically, ensuring it is perpendicular to the ground for the most accurate reading.

4. Read the Measurement

The measurement displayed on the tool is the truck’s height. It’s recommended to measure at least twice to ensure accuracy.

Note:

• Measure the truck’s height when it’s unloaded or loaded with a typical payload for the most accurate measurement.
• Refer to the truck’s technical specifications in the owner’s manual to compare with your measurements.

Height Chart for Common Truck Models

To help you understand the height of some popular truck models, XE TẢI HÀ NỘI provides the following information:

Note: This table is for reference only. Truck height may vary depending on the version and design of each model.

Frequently Asked Questions About Measuring Truck Height

1. Should the antenna be included when measuring truck height?

According to current regulations, the antenna height is not included when measuring truck height.

2. How do I know which routes have height restrictions?

Routes with height restrictions usually have clear traffic signs indicating the maximum permitted height. Pay attention to these signs while driving.

3. My truck is taller than the allowed limit, what can I do?

If your truck exceeds the height limit, find an alternative route suitable for your vehicle. Never attempt to drive through a height-restricted area to avoid endangering yourself and others.

Conclusion

We hope the information provided by XE TẢI HÀ NỘI in this article has helped you understand how to measure truck height and its importance.

Visit the XE TẢI HÀ NỘI website for more helpful information about trucks and reliable transportation services. Contact us at 0987.654.321 for consultation and support.